Adorable 3D Home Décor Basket
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_feature_fruit-basket.jpg)
Make a stylish home décor basket with your ScanNCut DX and display it with anything you imagine, even fancy, craft inspired fruit!
Supplies: ScanNCut DX, card stock, washi tape, and depending on the material you choose, use either hot glue (felt, foam), or rubber cement (paper).
Find a fun decorative, repeating pattern, one that you can repeat on a 12x12 mat and scan it in to the ScanNCut.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_small-repeat-pattern-768x1024.jpg)
Scan in + Save the image to your ScanNCut.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_repeat-pattern_scanncut_02.jpg)
On your ScanNCut, retrieve scanned image. To create one larger image (or to create a size for the project you are doing), increase your number of patterns selected. Save your newly repeated pattern to machine. See image below.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_repeat-pattern_scanncut.jpg)
Place crafting felt (or whatever fabric you choose) onto a 12x12 mat and scan into machine. You may need to use some Washi tape to keep the edges down.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_felt-mat-768x1024.jpg)
The Auto-Blade should be set on Auto, and it’s always best to do a test cut on the felt/fabric. Press cut. Repeat these steps one more time for a total of two complete pieces. Carefully peel felt off mat. Use the ScanNCut hook and spatula tool to remove all leftover felt pieces.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_repeat-pattern_04.jpg)
Basket Sides: Cut the first piece in half.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_repeat-pattern_03.jpg)
Attach two repeat patterns using hot glue to create a circle.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket-sides-attached.jpg)
Basket Bottom: Place attached pieces on top of another repeat pattern and trace. Cut along trace line and then attached with hot glue.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_measure-twice.jpg)
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_measure_twice_02-768x1024.jpg)
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_sides_bottom.jpg)
Basket Handle: Attach a slim piece of card stock to a skinny piece of the repeated pattern using hot glue or rubber cement. The card stock will act as support for the handle. Then, fasten handle to basket.
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_close-up.jpg)
Show off your new creation!
![](-/media/XBlog/scanncut/wp-content/uploads/2019/03/sz_fruit-basket_final_01.jpg)
Next, we will fill it with craft inspired fruit pieces! Stay tuned!